Double cab - Toyota Hilux Generation 7 2005-2010 Workshop Manual
- Make
- Toyota
- Model
- Hilux Toyota Hilux Generation 7 2005-2010 Workshop Manual
- Section
- Double cab - Toyota Hilux Generation 7 2005-2010 Workshop Manual
Double cab
WS–32
WINDSHIELD / WINDOWGLASS – POWER WINDOW CONTROL SYSTEM

3
CHECK HARNESS AND CONNECTOR (FOR POWER SOURCE OF DRIVER SIDE J/B
ASSEMBLY) (a)
Disconnect the 1A,1C, and 1H driver side J/B

connectors. Wire Harness Side: (b)
Measure the voltage and resistance.
Driver Side J/B
Standard voltage
1A Tester Connection Condition Specified Condition 1A-6 - Body ground Constant 10 to 14 V WS 1C-16 (ECU-B) - Body Constant 10 to 14 V ground Front View IG 1A-4 (IG) - Body ground Ignition switch ON 10 to 14 V
Standard resistance
Driver Side J/B Tester Connection Condition Specified Condition 1H-18 (GND) - Body Below 1 Ω Constant ground 1H (c)
Reconnect the driver side J/B connectors.
Front View NG
REPAIR OR REPLACE HARNESS OR
GND CONNECTOR Driver Side J/B
1C Front View ECU-B B087984E01
4
CHECK HARNESS AND CONNECTOR (POWER WINDOW REGULATOR MASTER SWITCH
ASSEMBLY - BODY GROUND)
(a)
Disconnect the P9 power window regulator master
switch connector.
(b)
Measure the voltage or resistance.

Wire Harness Side (Double Cab):
Standard voltage:
Double cab
Power Window Regulator Master Switch Front View Tester Connection Condition Specified Condition B P9-7 (B) - Body ground Ignition switch ON 10 to 14 V E
Access cab
P9 Tester Connection Condition Specified Condition P9-9 (B) - Body ground Ignition switch ON 10 to 14 V B062895E08
Standard resistance:
Double cab
| Tester Connection | Condition | Specified Condition |
|---|---|---|
| P9-1 (E) - Body ground | Constant | Below 1 Ω |
Parts & tools for this job For Toyota Hilux
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLSocket setSearch: socket set metric
- BOOKHaynes manualSearch: Haynes manual Toyota Hilux
As an Amazon Associate we earn from qualifying purchases.