Handle Assembly - Toyota Hilux Generation 7 2005-2010 Workshop Manual
- Make
- Toyota
- Model
- Hilux Toyota Hilux Generation 7 2005-2010 Workshop Manual
- Section
- Handle Assembly - Toyota Hilux Generation 7 2005-2010 Workshop Manual
Handle Assembly
ED–49 ENGINE HOOD / DOOR – FRONT DOOR (w/o Power Window)

23. INSTALL FRONT DOOR LOWER FRAME BRACKET

GARNISH LH
(a) Engage the 3 clips and install the front door lower frame bracket garnish LH.
NOTICE: Confirm that no clips remain on the door panel before the garnish is installed. Transfer any remaining clips to the garnish side before installing it. Installing the garnish with any clips remaining on the door panel side could cause B088092E01 the clips to drop inside the door panel.
24. INSTALL FRONT DOOR WINDOW REGULATOR

HANDLE ASSEMBLY
(a) Install the window regulator handle plate. Inside
ED B088407E01 (b) Install the front door window regulator handle assembly with the snap ring. Snap Ring

B088408E01
Parts & tools for this job For Toyota Hilux
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLSocket setSearch: socket set metric
- BOOKHaynes manualSearch: Haynes manual Toyota Hilux
As an Amazon Associate we earn from qualifying purchases.