Troubleshooting - Toyota Hilux Generation 7 2005-2010 Workshop Manual
- Make
- Toyota
- Model
- Hilux Toyota Hilux Generation 7 2005-2010 Workshop Manual
- Section
- Troubleshooting - Toyota Hilux Generation 7 2005-2010 Workshop Manual
Troubleshooting

C TROUBLESHOOTING
Push the terminal retainer down to the temporary lock position.
Retainer at Full Lock Position
Retainer at Temporary Lock Position [Male] [Female] Locking Lug (c) Release the locking lug from terminal and pull the terminal out from rear.
Tool
4.
INSTALL TERMINAL TO CONNECTOR
(a) Insert the terminal.
HINT:
1. Make sure the terminal is positioned correctly.
2. Insert the terminal until the locking lug locks firmly.
3. Insert the terminal with terminal retainer in the temporary lock position.
(b) Push the secondary locking device or terminal retainer in to the full lock position.
5.
CONNECT CONNECTOR
16
TOYOTA TACOMA (EM01D0U)
Parts & tools for this job For Toyota Hilux
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLSocket setSearch: socket set metric
- BOOKHaynes manualSearch: Haynes manual Toyota Hilux
As an Amazon Associate we earn from qualifying purchases.