- Corsa C Workshop Manual
- General Vehicle Information
- A Maintenance, Body and Chassis Sheet Metal Parts, Frame
- B Paint
- C Body Equipment
- D Heating, Ventilation, Air Conditioning (HVAC)
- E Front Wheel Suspension, Wheels and Tyres
- F Rear Axle and Rear Wheel Suspension
- H Brakes
- J Engine and Engine Aggregates
- Repair Instructions
- Description and Operation
- Special Tools and Equipment
- Diagnostic Information and Procedures
- Other Information
- Technical Service Bulletins
- Inspections
- Technical Information
- OHC Petrol Engine
- DOHC Petrol Engine
- Repair Instructions
- Description and Operation
- Diagnostic Information and Procedures
- Technical Service Bulletins
- General
- Seals and Seal Rings
- Ribbed V-Belt
- Engine Damping Block
- Oil Circulating
- Timing Gear Case
- Cylinder Block
- Cylinder Head
- Repair Instructions
- Cylinder head and attaching parts, check and measure - Survey
- Cylinder head height, check
- Cylinder head, check for plane surface
- Valve, measure
- Inner diameter of valve guide, check
- Valve stem play, determine
- Installation height of valves, check
- Installation height of valve guide, check
- Cylinder head, overhaul
- Cylinder head, attach to assembly tool set KM-6215
- Cylinder head, disassemble
- Valves, remove
- Valve seat, cut (in cylinder head)
- Valve guide, ream
- Valve, grind
- Valve, grind in
- Valve stem seals, replace
- Cylinder head, assemble
- Cylinder head machining table of contents
- Remove and install exhaust gas recirculation valve
- Exhaust Gas Recirculation Pipe, Remove and Install
- Remove and install exhaust gas recirculation valve
- Remove and install cylinder head cover (Z 10 XE, Z 10 XEP, without air conditioning, LHD)
- Remove and install cylinder head (Z 10 XE, Z 10 XEP, without air conditioning, LHD)
- Remove and install cylinder head cover (Z 12 XE, Z 12 XEP, Z 14 XEP, with air conditioning, LHD)
- Remove and install cylinder head (Z 12 XE, Z 12 XEP, Z 14 XEP, with air conditioning, LHD)
- J307000 Cylinder Head Cover, Remove and Install (Z 14 XE, Z 16 YNG with AC, LHD)
- Remove and install cylinder head (Z 10 XE, Z 10 XEP, with air conditioning, LHD)
- Remove and install cylinder head (Z 12 XE, Z 12 XEP, Z 14 XEP, without air conditioning, LHD)
- J312000 Cylinder Head, Remove and Install (Z 14 XE, Z 16 YNG with AC)
- J307000 Cylinder Head Cover, Remove and Install (Z 18 XE, with Air Conditioning, LHD)
- J312000 Cylinder Head, Remove and Install (Z 18 XE, with Air Conditioning, LHD)
- Remove and install exhaust gas recirculation valve
- Remove and install adapter, exhaust gas recirculation valve
- Remove and install exhaust gas recirculation valve (Z 12 XE, Z 12 XEP, Z 14 XEP)
- Attaching parts to cylinder head, remove and install
- Description and Operation
- Component Locator
- Specifications
- Special Tools and Equipment
- Camshaft
- Valves
- Intake manifold
- Exhaust manifold
- Spark Plug
- Fuel Injection Systems
- Engine Electrics
- Cooling System
- Turbo-Charging
- DOHC diesel engine
- K Clutch and Transmission
- L Fuel and Exhaust System
- M Steering
- N Electrical Equipment and Instruments
- R Accessories