Workshop Manuals Factory service & repair Alfa Romeo
01 Introduction and contents02 Technical data and maintenance03 Engine04 Clutch05 Gearbox06 Front axle and drive shafts07 Brakes08 Steering09 Suspension and wheels10 Heating and ventilation11 Bodywork12 Timing belt data sheets
Alfa Romeo 145/146 Factory Service Manual (1994-1999)11 · Bodywork
11 · Body & interior

Doors

Make
Alfa Romeo
Model
145/146 Factory Service Manual
Year
1994–1999
Section
Mobile bodywork components › Doors
BodyworkDoors

DOORS

REMOVAL AND REFITTING

  1. Remove the pin from the door check strap, half-close the door to back off the pin and then re-open the door.
Door hinge area with screw being loosened
  1. Loosen the two screws securing the door to the hinge.
Close-up of hinge screws
  1. Lift the door unit the tapered pins of the hinges can be lifted from their seatings. Remove the door.
Door in open position showing hinge and check strap

Refit the door by reversing the procedure followed for removal and note the following.

  1. If a new door is being used apply the specified sealant along the inside edge of the door.

NOTE: Check that the sound-proof panels are present inside the door panels.

Door panel with sealant application tool shown

Parts & tools for this job For 1994 Alfa Romeo 145/146

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.