Airbag failure warning light on
- Make
- Alfa Romeo
- Model
- GT Factory Service Manual
- Year
- 2003–2010
- Section
- Instrument panel › Airbag failure warning light on
AIRBAG FAILURE WARNING LIGHT ON
During starting, the air bag failure warning light comes on and remains on for more than 4 seconds (control unit initial test)
| Results of the tests | ||||
| 1 | CHECK WITH DIAGNOSTIC EQUIPMENT | All OK | Problems met | Operation |
|---|---|---|---|---|
Connect the Examiner to the diagnostic socket. Check that there are no faults in the Air Bag control unit | Continue to Step 2 | Driver''s Air Bag error | Continue to Step 2 | |
| Passenger Air Bag error | Continue to Step 3 | |||
| Driver''s Side Bag error | Continue to Step 4 | |||
| Passenger Side Bag error | Continue to Step 4 | |||
| Driver''s Air Bag with curtain error | Continue to Step 5 | |||
| Passenger Air Bag with curtain error | Continue to Step 5 | |||
| Driver''s pretensioner error | Continue to Step 6 | |||
| Passenger pretensioner error | Continue to Step 6 | |||
| Driver''s satellite sensor error | Continue to Step 7 | |||
| Passenger satellite sensor error | Continue to Step 7 | |||
| Passenger Air Bag disabling switch error | Continue to Step 8 | |||
| Air Bag failure warning light error | Continue to Step 9 | |||
| Examiner does not converse | Check the AIR BAG control unit supply and earth and the connection between the diagnostic socket and the Air Bag control unit See | |||
| 2 | DRIVER''S AIR BAG CHECK | All OK | Problems met | Operation |
Before any R/R operation involving the explosive charges, disconnect the battery leads for 10 minutes Check that the driver''s air bag is not faulty | Continue to Step 3 | Air Bag defective | Replace Air Bag Op. | |
| Clock spring defective | Replace the clock spring Op. Op. 5580C12 CLOCK SPRING FOR AIR BAG MODULE ON STEERING WHEEL R R | |||
| Faulty wiring | Replace wiring Op. 5580C80 | |||
| Control unit defective | Replace air bag control unit Op. | |||
| 3 | PASSENGER AIR BAG CHECK | All OK | Problems met | Operation |
Before any R/R operation involving the explosive charges, disconnect the battery leads for 10 minutes Check that the passenger air bag is not faulty | Continue to Step 4 | Air Bag defective | Replace Air Bag Op. | |
| Faulty wiring | Replace wiring Op. 5580C80 | |||
| Control unit defective | Replace air bag control unit Op. | |||
| 4 | SIDE BAG CHECK | All OK | Problems met | Operation |
Before any R/R operation involving the explosive charges, disconnect the battery leads for 10 minutes Check that the side bags are not faulty | Continue to Step 5 | Air Bag defective | Replace Air Bag Op. | |
| Faulty wiring | Replace wiring Op. Op. 5580C86 SIDE BAG WIRING HARNESS (ONE) LH OR RH - R R OR REPLACE | |||
| Control unit defective | Replace air bag control unit Op. | |||
| 5 | AIR BAG WITH CURTAIN CHECK | All OK | Problems met | Operation |
Before any R/R operation involving the explosive charges, disconnect the battery leads for 10 minutes Check that the head bags are not faulty | Continue to Step 6 | Air Bag defective | Replace Air Bag Op. | |
| Faulty wiring | Replace wiring Op. 5580C80 | |||
| Control unit defective | Replace air bag control unit Op. | |||
| 6 | PRETENSIONER CHECK | All OK | Problems met | Operation |
Before any R/R operation involving the explosive charges, disconnect the battery leads for 10 minutes Check that the pretensioners are not faulty | Continue to Step 7 | Pretensioner defective | Replace pretensioner Op. Op. 7065A12 FRONT SEAT BELT (ONE), LH OR RH, WITH PRETENSIONER ON WHEEL - R R | |
| Faulty wiring | Replace wiring Op. 5580C80 | |||
| Control unit defective | Replace air bag control unit Op. | |||
| 7 | SATELLITE SENSOR CHECK | All OK | Problems met | Operation |
Before any R/R operation involving the explosive charges, disconnect the battery leads for 10 minutes Check that the satellite sensors are not faulty | Continue to Step 8 | Defective sensor | Replace satellite sensor Op. | |
| Faulty wiring | Replace wiring Op. 5580C96 | |||
| Control unit defective | Replace air bag control unit Op. | |||
| 8 | PASSENGER AIR BAG DISABLING SWITCH CHECK | All OK | Problems met | Operation |
Check:
| Continue to Step 9 | Passenger Air Bag disabling switch faulty | Replace the device Op. | |
| Connections not correct | Replace wiring See | |||
| 9 | ELECTRICAL EQUIPMENT CHECK | All OK | Problems met | Operation |
Before any R/R operation involving the explosive charges, disconnect the battery leads for 10 minutes Check the connection between the Air Bag control unit and the Air Bag failure warning light at the instrument panel connector. To switch off the fault warning light, the AIR BAG control unit sends a posistive signal to the instrument panel. | Continue to Step 10 | Faulty wiring | Replace wiring See | |
| 10 | CHECK ON CORRECT OPERATION | All OK | Problems met | Operation |
| Check that the AIR BAG system is working properly. | End of diagnosis | Fault persists | Replace air bag control unit Op. | |
Parts & tools for this job For 2003 Alfa Romeo GT
- TOOLOBD2 scanner with SRSSearch: OBD2 scanner ABS SRS
- TOOLTrim removal tool kitSearch: trim removal tool kit
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.