Display module no signal - to check panel
- Make
- Alfa Romeo
- Model
- GT Factory Service Manual
- Year
- 2003–2010
- Section
- Instrument panel › Display module no signal - to check panel
‹ Prev M.i.l warning light stays on / engine startsNext › Water in diesel filter warning light on constantly
Fault diagnosisDisplay module no signal - to check panel
DISPLAY MODULE NO SIGNAL - TO CHECK PANEL
The display module is switched on at key-on by the instrument panel, and it displays the current check information for a few seconds, after which ''Check OK'' should be displayed
| Results of the tests | ||||
| 1 | CHECK WITH DIAGNOSTIC EQUIPMENT | All OK | Problems met | Operation |
|---|---|---|---|---|
| Connect the diagnostic equipment and check the operation of the display segments at the INSTRUMENT PANEL NODE in active diagnosis | End of diagnosis | One or more segments do not come on | Replace the instrument panel Op. | |
‹ Prev M.i.l warning light stays on / engine startsNext › Water in diesel filter warning light on constantly
Parts & tools for this job For 2003 Alfa Romeo GT
- TOOLOBD2 scannerSearch: OBD2 scanner
- TOOLDigital multimeterSearch: automotive digital multimeter
- TOOLBack-probe test leadsSearch: back probe test leads
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.