Passenger air bag disabled warning light
- Make
- Alfa Romeo
- Model
- GT Factory Service Manual
- Year
- 2003–2010
- Section
- Instrument panel › Passenger air bag disabled warning light
PASSENGER AIR BAG DISABLED WARNING LIGHT
On starting, the ''Passenger Air Bag Disabled'' warning light comes on and remains on for longer than 4 seconds (control unit initial test)
Warning: With the Passenger Bag exclusion switch in the OFF position the warning light is lit, while in the ON position the light is not lit.
| Results of the tests | ||||
| 0 | PRELIMINARY CHECK | All OK | Problems met | Operation |
|---|---|---|---|---|
| Check that the passenger Air Bag disabling switch is in the ON position | Continue to Step 1 | Switch not set to ON | Position the switch correctly | |
| 1 | CHECK WITH DIAGNOSTIC EQUIPMENT | All OK | Problems met | Operation |
| Connect the diagnostic equipment (Examiner Plus or Smart) to the diagnostic socket and check that there are no faults in the AIR BAG control unit | Continue to Step 2 | There are errors in the control unit. | Continue according to the instructions for the diagnostic equipment | |
| 2 | CHECK ELECTRICAL SYSTEM | All OK | Problems met | Operation |
Check whether the connection between the Air Bag control unit and instrument panel is shorting to earth or with broken circuit See | Continue to Step 3 | Faulty wiring: short to earth | Renew the wiring See | |
| Faulty wiring: broken circuit and warning light on | Renew the wiring See | |||
| Faulty wiring: broken circuit and warning light on | Replace instrument panel Op. | |||
| 3 | CHECK ON CORRECT OPERATION | All OK | Problems met | Operation |
| Check that the fault is no longer present | End of diagnosis | Fault persists | Replace air bag control unit Op. | |
Parts & tools for this job For 2003 Alfa Romeo GT
- TOOLOBD2 scanner with SRSSearch: OBD2 scanner ABS SRS
- TOOLTrim removal tool kitSearch: trim removal tool kit
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.