Trip meter does not zero
- Make
- Alfa Romeo
- Model
- GT Factory Service Manual
- Year
- 2003–2010
- Section
- Instrument panel › Trip meter does not zero
Fault diagnosisTrip meter does not zero
TRIP METER DOES NOT ZERO
With the ignition ON, the milometer cannot be zeroed using the button.
| Results of the tests | ||||
| 1 | CHECK WITH DIAGNOSTIC EQUIPMENT | All OK | Problems met | Operation |
|---|---|---|---|---|
Connect the Examiner to the diagnostic socket. Check that there are no faults in the instrument panel | Continue to Step 2 | There are errors | Proceed in accordance with the instructions given by the diagnostic equipment | |
| 2 | ELECTRICAL CIRCUIT CHECK | All OK | Problems met | Operation |
Check:
| Continue to Step 3 | Connections defective, earth defective | Restore the correct connections, if necessary, replace the wiring See | |
| 3 | LEFT CONTROL PANEL CHECK | All OK | Problems met | Operation |
Check that the left control panel is working properly See | Continue to Step 4 | Left control panel defective | Replace the left control panel Op. Op. 5560B56 PANEL WITH MULTIFUNCTION DISPLAY AND HEADLAMP ALIGNMENT SWITCHES BUTTONS R R | |
| 4 | CHECK ON CORRECT OPERATION | All OK | Problems met | Operation |
| Check that the fault is no longer present | End of diagnosis | |||
Parts & tools for this job For 2003 Alfa Romeo GT
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLSocket setSearch: socket set metric
- BOOKHaynes manualSearch: Haynes manual Alfa Romeo GT
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.