Workshop Manuals Factory service & repair Alfa Romeo
Alfa Romeo GT Factory Service Manual (2003-2010)22 · Fault diagnosis
22 · Diagnostics

Code failure warning light on

Make
Alfa Romeo
Model
GT Factory Service Manual
Year
2003–2010
Section
Instrument panel › Code failure warning light on
Fault diagnosisCode failure warning light on

CODE FAILURE WARNING LIGHT ON

The CODE symbol appears. The I.E. warning light comes on regularly at the key on.

Results of the tests
1CHECK WITH DIAGNOSTIC EQUIPMENTAll OKProblems metOperation
Connect the diagnostic equipment (Examiner Plus or Smart) to the diagnostic socket and check whether there are errors in the engine management control unit or the Body ComputerContinue to Step 2Errors detected in the control unitContinue following the instructions for the diagnostic equipment
Errors detected in the Body ComputerContinue following the instructions for the diagnostic equipment
2EMERGENCY STARTINGAll OKProblems metOperation
1.9 JTD 16VCarry out the emergency starting manoeuvre, using the accelerator pedalContinue to Step 3The engine does not start

Replace control unit Op.

Op. 1060G80 DS ELECTRIC INJECTION CONTROL UNIT - R R

2.0 JTSCarry out the emergency starting manoeuvre, using the accelerator pedalContinue to Step 3The engine does not start

Replace control unit Op.

1056F82

3.2 V6Carry out the emergency starting manoeuvre, using the accelerator pedalContinue to Step 3The engine does not start

Replace control unit Op.

1056B82

3CHECK ON CORRECT OPERATIONAll OKProblems metOperation
Check that the fault is no longer presentEnd of diagnosisThe fault persists: Body Computer defective

Replace the Body Computer Op.

Op. 5505A32 BODY COMPUTER - R R

Parts & tools for this job For 2003 Alfa Romeo GT

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.