Workshop Manuals Factory service & repair Alfa Romeo
01 General information02 Specifications03 Manufacturing data and tolerances04 Tightening torques05 Fluids and lubricants06 Maintenance07 Diagnostic checks08 Engine09 Clutch10 Gearbox and differential11 Axles and driveshafts12 Brakes13 Steering14 Suspension and wheels15 Heating, air conditioning and auxiliary units16 Electrical equipment17 Body fittings18 Body panels and frame19 Wiring diagrams and electrical functions20 Wiring harnesses21 Connectors and pin-outs22 Fault diagnosis23 Special tools
Alfa Romeo GT Factory Service Manual (2003-2010)22 · Fault diagnosis
22 · Diagnostics

Recharging warning light on constantly

Make
Alfa Romeo
Model
GT Factory Service Manual
Year
2003–2010
Section
Instrument panel › Recharging warning light on constantly
Fault diagnosisRecharging warning light on constantly

RECHARGING WARNING LIGHT ON CONSTANTLY

2.0 JTS, 3.2 V6, 1.9 JTD 16V

After the engine has been started, the recharging symbol appears in the Instrument Panel Node display

Results of the tests
0PRELIMINARY CHECKSAll OKProblems metOperation
Check that the D+ terminal on the alternator delivers a voltage of at least 12 VContinue to Step 1The alternator does not deliver 12 VContinue to Step 8
1CHECK WITH DIAGNOSTIC EQUIPMENTAll OKProblems metOperation
Using the Examiner check, in the Instrument Panel Node ambient, that there are no errorsContinue to Step 5Impossible to connect with the Instrument Panel control unitContinue to Step 2
There are errorsContinue in accordance with the instructions for the diagnostic equipment
2ELECTRIC POWER SUPPLY CHECKAll OKProblems metOperation
Check that the Instrument Panel Node electrical power supply is correct.Continue to Step 3Positive and/or earth electrical power supply faultyReplace the component involved (if a fuse is involved, search for the cause of the problem)
3CHECK ELECTRICAL CONNECTIONSAll OKProblems metOperation
Check the electrical connections between the Body Computer and the Instrument Panel, in particular that each individual pin is correctly connected.Continue to Step 4Electrical connections not workingRestore damaged electrical connections.
4CHECK WITH DIAGNOSTIC EQUIPMENTAll OKProblems metOperation
Using the Examiner, check the possibility of connecting with the Instrument Panel NodeContinue to Step 5Impossible to connect with the Instrument Panel

Replace the instrument panel Op.

Op. 5560B11 ANALOGUE CONTROL PANEL - R+R OR REPLACE

5CHECK WITH DIAGNOSTIC EQUIPMENTAll OKProblems metOperation
Using the Examiner check, in the Body Computer Node ambient, that there are no errorsContinue to Step 1Impossible to connect with the Body Computer control unitContinue to Step 6
There are errorsContinue in accordance with the instructions for the diagnostic equipment
6ELECTRIC POWER SUPPLY CHECKAll OKProblems metOperation
Check that the Body Computer Node electrical power supply is correctContinue to Step 7Positive and/or earth electrical power supply faultyReplace the component involved (if a fuse is involved, search for the cause of the problem)
7CHECK WITH DIAGNOSTIC EQUIPMENTAll OKProblems metOperation
Using the Examiner, check the possibility of connecting with the Body Computer NodeContinue to Step 5Impossible to connect with the Body Computer control unit

Replace the Body Computer Node Op.

Op. 5505A32 BODY COMPUTER - R R

8ELECTRICAL CIRCUIT CHECKAll OKProblems metOperation

Check the continuity and insulation of the electrical circuit between the battery, starter motor and alternator See

See E5010 STARTING AND RECHARING

Continue to Step 9Connections faulty

Restore the correct connections, if necessary replace the faulty components See

See E5010 STARTING AND RECHARING

9CHECKING BATTERY CHARGEAll OKProblems metOperation
Check the battery chargeContinue to Step 11Battery discharged

Recharge the battery Op.

Op. 5530B14 BATTERY - RECHARGE

Battery discharged and cannot be recharged

Replace the battery Op.

Op. 5530B10 BATTERY - R+R

10CHECKING ALTERNATORAll OKProblems metOperation

2.0 JTS

3.2 V6

1.9 JTD 16V

Heater

Check, carrying out the, that the alternator is working properlyEnd of diagnosisAlternator operating faults

Replace the alternator Op.

Op. 5530A10 ALTERNATOR - R+R

2.0 JTS

3.2 V6

1.9 JTD 16V

Air Conditioner

Check, carrying out the, that the alternator is working properlyEnd of diagnosisAlternator operating faultsReplace the alternator Op. 5530A14

Parts & tools for this job For 2003 Alfa Romeo GT

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.