22 · Diagnostics

Seat belt unfastened warning light on

Fault diagnosisSeat belt unfastened warning light on

SEAT BELT UNFASTENED WARNING LIGHT ON

2.0 JTS, 3.2 V6, 1.9 JTD 16V

The warning light remains on with the driver''s seat belt fastened.

The seat belt not fastened warning light is switched off directly by the buckle being fastened.

1	SWITCH CHECK	All OK	Problems met	Operation
		Results of the tests
	Check that the seat belt not fastened warning light switch is working properly	Continue to Step 2	Switch not working	Replace the lower belt branch Op. Op. 7065A14 ANCHORAGE ROD FOR, (ONE), FRONT SEAT BELT LEFT OR RIGHT - R.R.
2	CHECK WITH DIAGNOSTIC EQUIPMENT	All OK	Problems met	Operation
	Using the Examiner check, in the Instrument Panel Node ambient, that there are no errors and the following parameters are present.	Continue to Step 3	There are errors	Continue in accordance with the instructions for the diagnostic equipment
3	ELECTRIC POWER SUPPLY CHECK	All OK	Problems met	Operation
	Check that the Instrument Panel Node electrical power supply is correct. See See E4010 INSTRUMENT PANEL	Continue to Step 4	Positive and/or earth electrical power supply fault.	Replace the defective component (if a fuse is involved, search for the cause of the problem)
4	CHECK WITH ACTIVE DIAGNOSIS	All OK	Problems met	Operation
	With the Examiner in the Instrument Panel Node ambient, check, in active diagnosis, that the seat belts not fastened warning light is correctly activated	End of diagnosis	The seat belt warning light is not correctly activated	Replace the instrument panel Op. Op. 5560B11 ANALOGUE CONTROL PANEL - R+R OR REPLACE

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.