Lateral acceleration and slewing sensor - r.r
- Make
- Fiat
- Model
- 500 Factory Service Manual
- Year
- 2007–2024
- Section
- Traction control › Lateral acceleration and slewing sensor - r.r
BrakesLateral acceleration and slewing sensor - r.r
LATERAL ACCELERATION AND SLEWING SENSOR - R.R
Removing
- Disconnect the negative battery terminal.
| Description | Connector | |
|---|---|---|
| Battery | See A001 BATTERY |
Op. 7040L22 REAR COVER ON TUNNEL - R.R.
Op. 7040L20 TUNNEL COVER - R.R
1. Undo the bolts fixing the lateral acceleration sensor.
2. Disconnect the lateral acceleration sensor and then remove it.
| Description | Connector | |
|---|---|---|
| 2 | Slewing control unit | See M091 SLEWING CONTROL UNIT |
Refitting
1. Connect the lateral acceleration sensor.
2. Position the lateral acceleration sensor with the arrow (2a) stamped on the actual sensor pointing in the direction of travel, then secure it using the bolts (2b).
| Description | Connector | |
|---|---|---|
| 1 | Slewing control unit | See M091 SLEWING CONTROL UNIT |
Op. 7040L20 TUNNEL COVER - R.R
Op. 7040L22 REAR COVER ON TUNNEL - R.R.
- Connect the negative battery terminal.
| Description | Connector | |
|---|---|---|
| Battery | See A001 BATTERY |
Parts & tools for this job For 2007 Fiat 500
- TOOLOBD2 scannerSearch: OBD2 scanner
- TOOLDigital multimeterSearch: automotive digital multimeter
- TOOLBack-probe test leadsSearch: back probe test leads
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.