500 Factory Service Manual (2007-2024): Brakes
General
Maintenance
Diagnostics
Engine
Transmission
Brakes
Steering & suspension
Heating & A/C
Electrical
Body & interior
Choose Sections to see everything in a chapter, or a chapter title to start at its first page.
General3 pages
Hydraulic braking system8 pages
- Introduction
- 3330da vacuum pump and brake servo vacuum circuit operation check
- Pedal assembly - r.r
- Master cylinder (pump) - r + r
- Brake fluid reservoir - r + r and wash inside
- Brake servo - r+r - includes separation from master cylinder (pump)
- Vacuum unit - r+r
- Flexible pipe to front disc brake caliper - r.r.
Anti-lock braking system – ABS17 pages
- Construction specifications
- Abs check/adjustment devices
- Abs system pipes
- Speed signal check
- Abs hydraulic and electronic control unit - r.r.
- Rpm sensor (one) for one front wheel, left or right - r.r.
- Left or right rear wheel RPM sensor (one) - r.r.
- Left rear wheel RPM sensor - r.r.
- Right rear wheel RPM sensor - r.r.
- Intermediate hose (one), left or right, to the rear brakes - r.r.
- Rigid pipe (one) from master cylinder (pump) to a.b.s hydraulic control unit - r.r.
- Rigid pipe from hydraulic control unit to left front brake - r.r.
- Rigid pipe from hydraulic control unit to right front brake - r.r.
- Rigid pipe from hydraulic control unit to right front brake - r.r. with power unit removed
- Rigid pipe (one), left or right, from hydraulic control unit with pipe connector to rear brakes - r.r.
- Rigid intermediate pipe between flexible rear brake pipes (one) left/right - r.r.
- Rigid pipe from connector to rear brakes . (one), left or right - r.r.