The sunroof sliding blind is not working

Fault diagnosisThe sunroof sliding blind is not working

1.2 8v, 1.3 Multijet, 1.4 16v

When the sunroof sliding blind is operated, it is released / operates irregularly.

1	SLIDING BLIND ATTACHMENT CHECK	All OK	Problems encountered	Operation
		Test results
	Check that the sliding blind is correctly attached.	End of diagnosis	1. The blind is not attached 2. The blind is released due to obstacles/ interference along the track.	1. Check the condition of the sliding blind attachment handle and whether the blind needs replacing. Op. 7030B28 SLIDING ROOF BLIND - R+R 2. Move on to Step 2
2	INTERFERENCE CHECK	All OK	Problems encountered	Operation
	Check for excessive interference between the sliding pads and guide track.	Move on to Step 2	Presence of interference between the sliding pads and guide track.	Clean the sliding guide/s.
3	DECORATIVE TRIM CORRECT POSITIONING CHECK	All OK	Problems encountered	Operation
	Check that the decorative trim is correctly positioned and will not interfere with the sliding blind.	End of diagnosis	Decorative trim incorrectly positioned.	Reposition the trim correctly or replace if necessary Op. 7030B34 SLIDING ROOF COMPARTMENT DECORATIVE SEAL - R+R

Parts & tools for this job For 2007 Fiat 500

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.