Workshop Manuals Factory service & repair Fiat
01 00 Introduction and technical data02 10 Engine03 18 Clutch04 21 Gearbox and differential05 33 Braking system06 41 Steering07 44 Suspension and wheels08 50 Auxiliary units09 55 Electrical system10 70 Bodywork
Fiat Bravo/Brava (182) Factory Service Manual (1995-2001)09 · 55 Electrical system
09 · Electrical

Alarm

Make
Fiat
Model
Bravo /Brava (182) Factory Service Manual
Year
1995–2001
Section
Alarm › Alarm
55 Electrical systemAlarm · page 1 of 2

Alarm

Diagram showing a pencil pressing a button on the alarm receiver unit, with arrows indicating movement and the label '5 impulses' beside it.

5 impulses

Diagram showing a pencil pressing a button on the alarm receiver unit, with arrows indicating movement.
Diagram showing a pencil pressing a button on the alarm receiver unit, with arrows indicating movement and the label '2 impulses' beside it.

2 impulses

  1. Immediately press the button for the re-ceiver as many times as indicated by the first digit of the password (for example: 5 times);
    it should be noted that for each impulse the LED will come on briefly to give a vi-sual confirmation.
  2. About 2 seconds after the last impulse (the fifth in the example) the LED will emit another flash to request the input of the next figure (the 2).
  3. Immediately press the button for the re-ceiver as many times as indicated by the second digit of the password (for exam-ple: 2 times);
    it should be noted that for each impulse the LED will come on briefly to give a vi-sual confirmation.
  4. About 2 seconds after the last impulse (the second in the example) the LED will emit another flash to request the input of the next figure (the zero).

Parts & tools for this job For 1995 Fiat Bravo

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.