Workshop Manuals Factory service & repair Fiat
Fiat Bravo/Brava (182) Factory Service Manual (1995-2001)09 · 55 Electrical system
09 · Electrical

Programming the alarm password

Make
Fiat
Model
Bravo /Brava (182) Factory Service Manual
Year
1995–2001
Section
Alarm › Programming the alarm password
55 Electrical systemProgramming the alarm password · page 1 of 2

Programming the alarm password

Alarm

Diagram showing a pencil pressing a button on an alarm receiver unit, with arrows indicating impulse directions.

2 impulses

  1. About 2 seconds after the last impulse (the fifth in the example) the LED will emit another flash to request the input of the next figure (the 2).
  2. Immediately press the button for the receiver as many times as indicated by the second digit of the password (for example: 2 times); it should be noted that for each impulse the LED will come on briefly to give a visual confirmation.
Diagram showing a pencil pressing a button on an alarm receiver unit, with arrows indicating impulse directions.
  1. About 2 seconds after the last impulse (the second in the example) the LED will emit another flash to request the input of the next figure (the zero).
Diagram showing a pencil near a button on an alarm receiver unit, with no impulse arrows shown.

0 impulses

  1. When a "zero" appears in the password" the button in the receiver should not be pressed, but you should wait for a new request to enter the figure indicated by the subsequent flashing.

Parts & tools for this job For 1995 Fiat Bravo

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.