DIPPED HEADLAMPS - Functional description

Functional description

The dipped headlamps activation and AUTO function (earth) signal is sent to pin 2 of connector I of the Body Computer M1 from the steering column switch unit H5

The dipped headlamps are automatically activated by the dusk sensor K125 (signal via the A-BUS line to pin 7 of connector D of M1); The dusk sensor K125 is supplied from the INT line protected by fuse F49 of junction unit B2.

The Body Computer M1 controls the supply of the dipped headlamps sending an earth signal to the underdashboard control unit B2 - from pin 8 of connector F of M1 - which energizes the relay T1: this supplies the dipped headlamps F10 (left) and F11 (right). Each circuit is protected by a junction unit B2 fuse F13 for the left headlamp and F12 for the right one.