Workshop Manuals Factory service & repair Fiat
01 General information02 Specifications03 Manufacturing data and tolerances04 Tightening torques05 Fluids and lubricants06 Maintenance07 Diagnostic checks08 Engine09 Clutch10 Gearbox and differential11 Axles and driveshafts12 Brakes13 Steering14 Suspension and wheels15 Heating, air conditioning and auxiliary units16 Electrical equipment17 Body fittings18 Body panels and frame19 Wiring diagrams and electrical functions20 Wiring harnesses21 Connectors and pin-outs22 Fault diagnosis23 Special tools
Fiat Idea Factory Service Manual (2003-2012)19 · Wiring diagrams and electrical functions
19 · Electrical

REVERSING LIGHTS - Description

Make
Fiat
Model
Idea Factory Service Manual
Year
2003–2012
Section
Interior lighting › REVERSING LIGHTS - Description
Wiring diagrams and electrical functionsREVERSING LIGHTS - Description

REVERSING LIGHTS - Description

Description

The vehicle is equipped with two reversing lights located in the rear lights.

They are operated each time reverse gear is engaged through the special switch on the outside of the gearbox casing.

The reversing light circuit is supplied with the ignition key in the ON position (INT/A) and is protected by a special fuse in the underdashboard control unit.

The signal that the reversing light has been switched on is managed by the Body Computer which forwards this information to the steering column switch unit for the automatic operation of the rearscreen wiper See E3021 REAR WINDOW WASH/WIPE and to the parking sensor control unit See E3090 PARKING SENSOR

Parts & tools for this job For 2003 Fiat Idea

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.