Workshop Manuals Factory service & repair Fiat
01 General information02 Specifications03 Manufacturing data and tolerances04 Tightening torques05 Fluids and lubricants06 Maintenance07 Diagnostic checks08 Engine09 Clutch10 Gearbox and differential11 Axles and driveshafts12 Brakes13 Steering14 Suspension and wheels15 Heating, air conditioning and auxiliary units16 Electrical equipment17 Body fittings18 Body panels and frame19 Wiring diagrams and electrical functions20 Wiring harnesses21 Connectors and pin-outs22 Fault diagnosis23 Special tools
Fiat Idea Factory Service Manual (2003-2012)19 · Wiring diagrams and electrical functions
19 · Electrical

TRAILER WIRING - Description

Make
Fiat
Model
Idea Factory Service Manual
Year
2003–2012
Section
Interior lighting › TRAILER WIRING - Description
Wiring diagrams and electrical functionsTRAILER WIRING - Description

TRAILER WIRING - Description

Description

The vehicle may be equipped with a tow hook with type approval for trailers, caravans, or towing in general.

This device should conform with the laws in force and should be fitted following the instructions enclosed in the fitting kit.

This fitting kit, in addition to the hook itself, also includes an electronic control unit for the operation of the trailer exterior lights as well as specific wiring for connecting the actual control unit with the rear lights of the vehicle and with a specific connection ( D73) located in the luggage compartment on the left hand side.

If a trailer is connected, the operation of the parking sensors is automatically inhibited.

The trailer control unit is supplied via the protected circuit by a special fuse in the junction unit under the dashboard.

Parts & tools for this job For 2003 Fiat Idea

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.