Workshop Manuals Factory service & repair Fiat
01 General information02 Specifications03 Manufacturing data and tolerances04 Tightening torques05 Fluids and lubricants06 Maintenance07 Diagnostic checks08 Engine09 Clutch10 Gearbox and differential11 Axles and driveshafts12 Brakes13 Steering14 Suspension and wheels15 Heating, air conditioning and auxiliary units16 Electrical equipment17 Body fittings18 Body panels and frame19 Wiring diagrams and electrical functions20 Wiring harnesses21 Connectors and pin-outs22 Fault diagnosis23 Special tools
Fiat Idea Factory Service Manual (2003-2012)19 · Wiring diagrams and electrical functions
19 · Electrical

FOG LIGHTS - Functional description

Make
Fiat
Model
Idea Factory Service Manual
Year
2003–2012
Section
Interior lighting › FOG LIGHTS - Functional description
Wiring diagrams and electrical functionsFOG LIGHTS - Functional description

FOG LIGHTS - Functional description

Functional description

The fog lights activated (earth) signal reaches pin 20 of connector H of M1 from the control button in the panel to the left of the steering wheel H91.

The side lights activated signal is sent to pin 28 of connector G of the Body Computer M1 from the steering column switch unit H5See E2010 SIDE LIGHTS / NO. PLATE LIGHTS.

The Body Computer M1 controls the supply for the fog lights by sending an earth signal to the engine compartment junction unit B1 from pin 8 of connector A of M1 which energizes the relay T14: this supplies the fog lights F15 (left) and F16 (right). The circuit is protected by fuse F30 of control unit B2.

The Body Computer M1 is connected, via the CAN line, to the instrument panel E50 to manage the fog lights on warning light.

Parts & tools for this job For 2003 Fiat Idea

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.