Workshop Manuals Factory service & repair Fiat
Fiat Seicento Factory Service Manual (1998-2010)02 · 10 Engine
02 · Engine

Refitting

Make
Fiat
Model
Seicento Factory Service Manual
Year
1998–2010
Section
Engine cooling (1108) › Refitting
10 EngineRefitting

(Op. 1088E30 continued)

  1. Unscrew the engine coolant temperature sender and remove.
Diagram showing the engine coolant temperature sender location on the engine block, indicated by callout number 1

Refitting

  • Tighten the engine coolant temperature sender to correct torque
FasteningComponentØValue (daNm)
-ENGINE COOLANT TEMPERATURE SENDERM163.4
  • Electrically connect the engine coolant temperature sender
NameConnector
Engine coolant temperature senderK35
  • Connect the negative (-) battery terminal
NameConnector
BatteryA1
  • Fill the engine cooling system with coolant
TypeComponentNameQty
CoolantENGINE COOLANT LEVEL CHECK AND TOP UPParaflu11-
  • Remove the body protection cover.
  • Close the engine compartment.
  • Remove the vehicle from the hoist.

1088E34 - ENGINE WATER THERMOMETER SENDER - R+R.

  • see Op. 1056A50 Engine water temperature SENSOR - R+R.

Parts & tools for this job For 1998 Fiat Seicento

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.