Workshop Manuals Factory service & repair Fiat
Fiat Seicento Factory Service Manual (1998-2010)02 · 10 Engine
02 · Engine

Refitting

Make
Fiat
Model
Seicento Factory Service Manual
Year
1998–2010
Section
Engine cooling (1108) › Refitting
10 EngineRefitting

(Cont. Op. 1088C12)

  1. Unscrew the engine compartment protection screws.
  2. Remove the engine compartment protection.
Diagram showing engine compartment with callout numbers 1 and 2 indicating the coolant outlet lower sleeve and its fastening points.
  1. Take out the engine coolant outlet lower sleeve and drain the coolant into a suitable container.
Diagram showing the engine coolant outlet lower sleeve inserted on the radiator, with callout number 1 pointing to the sleeve connection.
  • Insert the engine coolant outlet lower sleeve on the radiator and fasten with the strap.
  • Follow Op. 1032D35 Timing COMPLETE GUARDS - R+R. for versions with air conditioner
  • Follow Op. 1032B14 TOOTHED timing DRIVE belt - R.R. for timing of distribution or for replacement on versions with air conditioner
  1. Unscrew screws (1a) and nut (1b).
  2. Remove the water pump.
Diagram showing the water pump removal area with callouts 1a, 1b, and 2 indicating screws, nuts, and the pump itself.

Refitting

Note: Before installing the water pump use a sharp blade to remove any silicon spreading over the edges of the areas to be sealed (pump body - crankcase) and with a dry cloth remove the traces of engine coolant.

  1. Apply around the entire pump body perimeter a 2.5 mm seam of sealant
TypeComponentNameQty
1Silicon seal ant.WATER PUMP--

Apply the sealant in a continuous seam (without interruptions) and perfectly match the end part with the beginning.

Diagram showing the water pump flange with a 2.5mm sealant seam indicated by callout 1.

(Cont.)

Parts & tools for this job For 1998 Fiat Seicento

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.