Refitting
- Make
- Fiat
- Model
- Seicento Factory Service Manual
- Year
- 1998–2010
- Section
- Engine cooling (1108) › Refitting
10 EngineRefitting · page 1 of 2
(Cont. Op. 1088B10)
- Remove the engine coolant supply tank.
Refitting
- Insert the engine coolant supply hose onto the tank.
- Assemble the engine coolant supply tank and fasten with its screws.
- Insert the engine coolant return pipe onto the tank.
- Fit the engine coolant return pipe in the tank support.
- Fill the engine cooling system with coolant
| Type | Component | Name | Qty | |
|---|---|---|---|---|
| - | Coolant | ENGINE COOLANT LEVEL CHECK AND TOP UP | Paraflu11 | - |
- Remove the body protection cover.
- Close the engine compartment.
1088B24 - ENGINE COOLING RADIATOR - R+R. FOR VERSIONS WITH AIR CONDITIONER
Removal
- Position the vehicle on a hoist.
- Open the engine compartment.
- Assemble the body protection covers.
- Disconnect the negative (-) battery terminal.
| Name | Connector | |
|---|---|---|
| - | Battery | A1 |
- Unscrew the engine compartment protection screws.
- Remove the engine compartment protection.
- Follow Op. 4450B12 Front WHEELS (two) - R.R.
- Follow Op. 7055B42 SUPPLEMENTARY WHEEL HOUSING (One) - R.R.
- Follow Op. 7055B10 FRONT BUMPER - R+R.
- Unscrew the engine coolant supply tank cap.
- Disconnect the radiator thermometric switch electrical connection
| Name | Connector | |
|---|---|---|
| 1 | Thermometric switch on radiator | I70 |
- Take out the lower engine coolant outlet sleeve from the radiator and drain the coolant into a suitable container.
(Cont.)
Parts & tools for this job For 1998 Fiat Seicento
- PARTEngine gasket setSearch: Fiat Seicento 1998 engine gasket set
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLFeeler gauge setSearch: feeler gauge set
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.