Refitting (page 2 of 2)

(Op. 1088B24 continued)

3. Take out the engine coolant upper sleeve from the radiator.

1. Disconnect the engine fan motor electrical connection and take off the electric cable strap

1. Unscrew the screws fastening the engine cooling radiator support and the horn bracket.
2. Move the horn bracket.

• Disconnect the engine coolant supply tank hoses from the straps on the rear of the radiator.

1. Take the engine cooling radiator out from its supports.
2. Take out the air breather hose from the engine cooling radiator.
3. Remove the engine cooling radiator.

1. Take out the fastening bracket (1a) from the engine cooling radiator (1b).
2. Unscrew the screws (2a) that fasten the engine cooling fan group (2b) and remove.

(Cont.)