Workshop Manuals Factory service & repair Fiat
Fiat Seicento Factory Service Manual (1998-2010)02 · 10 Engine
02 · Engine

Refitting

Make
Fiat
Model
Seicento Factory Service Manual
Year
1998–2010
Section
Engine cooling (1108) › Refitting
10 EngineRefitting

(Cont. Op. 1088E10)

  1. Unscrew the engine compartment protection screws.
  2. Remove the engine compartment protection.
Diagram showing the lower engine compartment area with callout numbers 1 and 2 pointing to fasteners and a support strap respectively.
Close-up diagram of a pipe connection secured by a clamp, labeled with callout number 1.
  • Disconnect the engine coolant supply tank pipe from the fan support strap.
  1. Disconnect the engine fan motor electrical connection and remove the electric cable from the strap
NameConnector
1 Engine fan motor -1N11
  1. Unscrew the screws fastening the fan to the radiator and remove.
Diagram of the radiator and fan assembly showing the fan motor at the bottom (callout 1) and the support structure (callout 2).
  1. Unscrew the nuts that fasten the electric fan motor to the support.
  2. Remove the support.
Diagram of the radiator cooling fan assembly showing the stop clip (callout 2) and the fan blades (callout 1).
  1. Take out the radiator cooling fan stop clip.
  2. Remove the radiator cooling fan.
Diagram showing the fan motor being aligned with the fan hub on the support frame, with callout 1 pointing to the motor connector.

Refitting

  • Assemble the radiator cooling fan onto the fan motor shaft.

Insert the shaft plug correctly into the radiator cooling fan socket.

  • Insert the stop clip on the radiator cooling fan.
  • Assemble the fan motor on the support and fasten with its nuts.
  • Assemble the fan on the radiator and fasten with its screws.
  • Connect the engine fan motor electrical connection
NameConnector
- Engine fan motor-1N11
  • Fit the fan motor cable on the strap.
  • Connect the engine coolant supply tank pipe to the fan support straps.
  • Assemble the engine compartment protection and fasten with its screws.
  • Connect the negative (-) battery terminal

(Cont.)

Parts & tools for this job For 1998 Fiat Seicento

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.