Refitting

(Cont. Op.1088B24)

3. Unscrew the thermometric switch from the engine cooling radiator and remove.

Refitting

• Tighten the thermometric switch on the cooling radiator to the correct torque

• Reposition the engine cooling fan group on the radiator and fasten with its screws.
• Insert the fastening bracket on the engine cooling radiator.
• Insert the air breather hose on the engine cooling radiator.

1. Install the engine cooling radiator (1a) and insert the side supports (1b) in their seats.

• Connect the engine coolant supply tank hose to the straps on the rear of the radiator.
• Reposition the horn bracket.
• Tighten the screws that fasten the engine cooling radiator support and the horn bracket to the front cross member.
• Connect the electrical connection to the engine fan motor and insert the electric cable strap

• Insert the engine coolant upper sleeve on the radiator.
• Insert the engine coolant outlet lower sleeve on the radiator.
• Connect the electrical connection to the thermometric switch on the radiator

• Assemble the engine compartment protection and fasten with its screws.
• Complete with Op. 7055B10 FRONT BUMPER - R+R.
• Complete with Op. 7055B42 SUPPLEMENTARY WHEEL HOUSING (one) - R.R.
• Complete with Op. 4450B12 Front WHEELS (two) - R.R.
• Connect the negative (-) battery terminal

• Fill the engine cooling system with coolant

• Remove the body protection cover.
• Close the engine compartment.
• Remove the vehicle from the hoist.