Installation (page 2 of 2)

1108 Euro 3

• Connect the coolant reservoir pipe to the bands on the rear of the radiator.
• Refit the horn bracket.
• Tighten the bolts securing the radiator mounting bracket and the horn bracket to the front cross-member.
• Connect the electrical connection to the engine fan motor and fit the electrical wiring band.

• Fit the coolant upper hose to the radiator.
• Fit the coolant lower hose to the radiator.
• Fit the engine compartment guard and fix it with the bolts.
• See Op. 7210E10 Front bumper
• See Op. 7055B42 Supplementary wheel arch (one) - r+r
• See Op. 4450B12 Front or rear wheels (two) - r+r
• Lower the vehicle.
• Connect the negative (-) battery terminal.

• Refill the engine cooling system with coolant.

• Remove the protective bodywork covers.
• Close the bonnet lid.
• Remove the car from the ramp.