Workshop Manuals Factory service & repair Fiat
Fiat Seicento Factory Service Manual (1998-2010)02 · 10 Engine
02 · Engine

1088c30 - thermostat group - r+r.

Make
Fiat
Model
Seicento Factory Service Manual
Year
1998–2010
Section
Engine cooling (899) › 1088c30 - thermostat group - r+r.
10 Engine1088c30 - thermostat group - r+r. · page 1 of 2

(Cont. Op. 1088C10)

  • Assemble the front right supplementary wheel housing (see Op. 7055B42 SUPPLEMENTARY WHEEL HOUSING (one) - R+R).
  • Assemble the engine compartment protection and fasten with its screws.
  • Assemble the front right wheel (see Op. 4450B10 front WHEEL (one) - R+R).
  • Lower the vehicle.
  • Connect the negative (-) battery terminal
NameConnector
-BatteryA1
  • Fill the engine cooling system with coolant
TypeComponentNameQty
-Coolant (I)ENGINE COOLANT LEVEL CHECK AND TOP UPParaflu114.8
  • Remove the body protection cover.
  • Close the engine compartment.
  • Remove the vehicle from the hoist.

1088C30 - THERMOSTAT GROUP - R+R.

Removal

  • Position the vehicle on a hoist.
  • Open the engine compartment.
  • Assemble the body protection covers.
  • Disconnect the negative (-) battery terminal.
NameConnector
-BatteryA1
  • Unscrew the engine coolant tank plug.
  • Unscrew the engine cooling circuit breather plug.
  • Raise the vehicle.
    1. Unscrew the engine compartment protection screws.
    2. Remove the engine compartment protection.
Diagram showing the removal of the engine coolant sleeve from the radiator, with callout numbers 1 and 2 indicating specific components.
  1. Take out the engine coolant sleeve from the radiator and drain the liquid into a suitable container.
Diagram showing the connection of the lower coolant outlet sleeve to the radiator and surrounding engine components.
  • Connect the lower coolant outlet sleeve to the radiator.
  • Assemble the engine compartment protection and fasten with its screws.
  • Lower the vehicle.
  1. Release the air cleaner cover clasps.
  2. Unscrew the throttle case air conveyor screws.
  3. Take out the oil vapours recovery pipe from the tappet cover.

(Cont.)

Parts & tools for this job For 1998 Fiat Seicento

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.