Refitting

(Cont. Op.1088B20)

3. Unscrew the thermometric switch from the radiator and remove it.

Refitting

• Tighten the thermometric switch on the engine cooling radiator to the correct torque

• Refit the engine radiator fan onto the radiator and fasten with its screws.
• Insert mounting bracket on engine radiator.
• Insert the air breather pipe on the engine radiator.

1. Install the radiator (1a) and insert the side supports (1b) in their seats.

• Reposition the horn bracket.
• Lock the screws that fasten the radiator support and the horn bracket to the front cross member.
• Connect the electrical connection to the engine fan motor and insert the electric cable strap

• Insert the engine coolant upper sleeve on the radiator.
• Insert the engine coolant outlet lower sleeve on the radiator.
• Connect the electrical connection to the thermometric switch on the radiator

• Assemble the engine compartment protection and fasten with its screws.
• Complete with Op. 7055B10 FRONT BUMPER - R+R.
• Assemble the front supplementary wheel housings (see Op. 7055B42 SUPPLEMENTARY WHEEL HOUSING (one) - R+R).
• Complete with Op. 4450B12 Front WHEELS (two) - R.R.
• Lower the vehicle.
• Connect the negative (-) battery terminal

• Fill the engine cooling system with coolant

• Remove the body protection cover.
• Close the engine compartment.
• Remove the vehicle from the hoist.