Workshop Manuals Factory service & repair Fiat
Fiat Seicento Factory Service Manual (1998-2010)02 · 10 Engine
02 · Engine

Refitting

Make
Fiat
Model
Seicento Factory Service Manual
Year
1998–2010
Section
Engine cooling (899) › Refitting
10 EngineRefitting · page 1 of 2

(Cont. Op. 1088B10)

  1. Remove the engine coolant supply tank.
Diagram showing the engine coolant supply tank with callout numbers 1, 2, 3, and 4 indicating screws, hose, pipe, and plug respectively.

Refitting

  • Insert the engine coolant supply hose onto the tank.
  • Assemble the engine coolant tank and fasten with its screws.
  • Insert the engine coolant return pipe onto the tank.
  • Fill the engine cooling system with coolant
TypeComponentNameQty
-Coolant ENGINE COOLANT LEVEL CHECK AND TOP UPParaflu11-
  • Remove the body protection cover.
  • Close the engine compartment.

1088B20 - ENGINE COOLING RADIATOR - R+R

Removal

  • Position the vehicle on a hoist.
  • Open the engine compartment.
  • Assemble the body protection covers.
  • Disconnect the negative (-) battery terminal.
NameConnector
- BatteryA1
  • Raise the vehicle.
  1. Unscrew the engine compartment protection screws.
  2. Remove the engine compartment protection.
Diagram showing the lower part of the engine compartment with callout numbers 1 and 2 indicating screws and the engine compartment protection panel.
  • Follow Op. 4450B12 Front WHEELS (two) - R.R.
  • Remove the front supplementary wheel housings (see Op. 7055B42 SUPPLEMENTARY WHEEL HOUSING (one) - R+R).
  • Follow Op. 7055B10 FRONT BUMPER - R+R.
  • Unscrew the engine coolant tank plug.
  1. Disconnect the radiator thermometric switch electrical connection
NameConnector
1 Thermometric switch on radiator170
  1. Take out the lower engine coolant outlet sleeve from the radiator and drain the coolant into a suitable container.

(Cont.)

Parts & tools for this job For 1998 Fiat Seicento

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.