Workshop Manuals Factory service & repair Fiat
Fiat Seicento Factory Service Manual (1998-2010)02 · 10 Engine
02 · Engine

Refitting

Make
Fiat
Model
Seicento Factory Service Manual
Year
1998–2010
Section
Engine cooling (899) › Refitting
10 EngineRefitting

(Cont. Op.1088E10)

  1. Unscrew the engine compartment protection screws.
  2. Remove the engine compartment protection.
Diagram showing engine compartment protection with callout numbers 1 and 2, and a close-up of an electrical connector labeled 1.
  1. Disconnect the engine fan motor electrical connection and withdraw the electric cable from the strap
NameConnector
1Engine fan motor -1N11
  1. Unscrew the screws fastening the fan to the radiator and remove.
Diagram showing the radiator and fan support assembly with callout numbers 1 and 2, and a close-up of the fan motor mounting bolts.
  1. Unscrew the nuts that fasten the electric fan motor to the support.
  2. Remove the support.
Diagram showing the radiator cooling fan assembly with callout numbers 1 and 2 indicating the stop clip and fan.
  1. Take out the radiator cooling fan stop clip.
  2. Remove the radiator cooling fan.
Diagram showing the removed radiator cooling fan and motor assembly with callout numbers 1 and 2.

Refitting

  • Assemble the radiator cooling fan onto the fan motor shaft.

Insert the shaft plug correctly into the radiator cooling fan socket.

  • Insert the stop clip on the radiator cooling fan .
  • Assemble the fan motor on the support and fasten with its nuts.
  • Assemble the fan on the radiator and fasten with its screws.
  • Connect the engine fan motor electrical connection
NameConnector
-Engine fan motor-1N11
  • Fit the fan motor cable on the strap.
  • Assemble the engine compartment protection and fasten with its screws.
  • Connect the battery negative (-) terminal

(Cont.)

Parts & tools for this job For 1998 Fiat Seicento

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.