Workshop Manuals Factory service & repair Fiat
Fiat Seicento Factory Service Manual (1998-2010)02 · 10 Engine
02 · Engine

Refitting

Make
Fiat
Model
Seicento Factory Service Manual
Year
1998–2010
Section
Engine cooling (899) › Refitting
10 EngineRefitting

(Cont. Op. 1088D10)

  1. Remove the engine compartment protection.
Diagram showing the removal of the lower sleeve from the engine radiator, with callout numbers 1 and 2 indicating screws and the sleeve respectively.
  1. Take out the lower sleeve from the engine radiator and drain the coolant into a suitable container.
Diagram showing the removal of the lower sleeve from the water pump.
  1. Take out the lower sleeve from the water pump and remove it.
Diagram showing the refitting of the engine radiator lower sleeve on the water pump.

Refitting

  • Insert the engine radiator lower sleeve on the water pump.
  • Insert the lower sleeve on the engine radiator.
  • Assemble the engine compartment protection and fasten with its screws.
  • Lower the vehicle.
  • Connect the negative (-) battery terminal
NameConnector
- BatteryA1
  • Fill the engine cooling system with coolant
TypeComponentNameQty
-Coolant (I)ENGINE COOLING SYSTEMParaflu114.8
  • Remove the body protection cover.
  • Close the engine compartment.
  • Remove the vehicle from the hoist.

1088D14 - COOLANT UPPER INLET SLEEVE TO RADIATOR - R+R.

Removal

  • Position the vehicle on a hoist.
  • Open the engine compartment.
  • Assemble the body protection covers.
  • Disconnect the battery (-) terminal

(Cont.)

Parts & tools for this job For 1998 Fiat Seicento

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.