Workshop Manuals Factory service & repair Fiat
Fiat Seicento Factory Service Manual (1998-2010)08 · 44 Suspension and wheels
08 · Steering & suspension

4450a - wheel geometry overview

Make
Fiat
Model
Seicento Factory Service Manual
Year
1998–2010
Section
Hubs and wheels › 4450a - wheel geometry overview
44 Suspension and wheels4450a - wheel geometry overview

4450A - WHEEL GEOMETRY OVERVIEW

Illustrates front wheel alignment and suspension component adjustment procedure
Diagram of a car on a lift showing wheel geometry angles with callout numbers 1 through 6.
Ref. Name
1 FRONT WHEEL TOE-IN
2 FRONT WHEEL CASTER
3 FRONT WHEEL CAMBER
4 REAR WHEEL TOE-IN
5 REAR WHEEL CAMBER
6 REAR WHEEL ALIGNMENT

List of operations

Code Operation Validity
4450A10 Front wheel geometry - Check with optical equipment - Incl. adj. if necessary
4450A40 Rear wheel geometry - Check with optical equipment - Incl. adj. if necessary
4450A90 Rear wheel alignment - Check with optical equipment

OPERATIONS

4450A10 - FRONT WHEEL GEOMETRY - CHECK WITH OPTICAL EQUIPMENT - INCL. ADJ. IF NECESSARY

  • The front wheel geometry should be checked after checking the following on parts that affect wheel geometry:
  • tyre inflation pressure;
  • the wheel rim eccentricity and squareness should not exceed 3 mm;
  • wheel bearing end float;
  • clearance between upright and wishbone stub axle;
  • steering link stub axle.

(Cont.d.)

Parts & tools for this job For 1998 Fiat Seicento

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.