Workshop Manuals Factory service & repair Fiat
Fiat Seicento Factory Service Manual (1998-2010)08 · 44 Suspension and wheels
08 · Steering & suspension

Refitting

Make
Fiat
Model
Seicento Factory Service Manual
Year
1998–2010
Section
Hubs and wheels › Refitting
44 Suspension and wheelsRefitting

(Cont.d. Op. 4450D10)

  1. Tighten the screws (1a) on the rear hub and remove it using the tool (1b)
Name Code
1b Puiler 1.847.017.004
Diagram showing a hand using a puller tool (1b) to remove a rear wheel hub, with callouts for screws (1a) and a close-up inset of the hub face.

The rear hub bearing must not be removed from the hub. If it needs replacement due to noise or excessive play, change the rear hub complete with bearing.

Refitting

  • Assemble the rear hub complete with bearing on the stub axle using the tool
Name Code
- Drift 1.870.152.000
  • Complete with Op. 3320B30 Rear brake DRUM (one) lh or rh - R+R.
  • Lower the vehicle.
  • Pull the handbrake completely.
  • Tighten nut of the rear wheel hub to the specified torque
Fastening Component Ø Value (daNm)
- Nut REAR WHEEL HUB M20 22.5

The rear wheel hub nut must be changed at each disassembly.

  • Lower the handbrake lever.

Parts & tools for this job For 1998 Fiat Seicento

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.