Workshop Manuals Factory service & repair Fiat
Fiat Seicento Factory Service Manual (1998-2010)08 · 44 Suspension and wheels
08 · Steering & suspension

Removal

Make
Fiat
Model
Seicento Factory Service Manual
Year
1998–2010
Section
Hubs and wheels › Removal
44 Suspension and wheelsRemoval

Removal

  1. Remove the front wheel hub from the upright (1a) using a press (1b).
Diagram showing a press tool (1b) removing a wheel hub component (1a)
  1. Put the front wheel hub in a vice.
  2. Move the bearing inner ring away from the hub using a chisel to make it possible to insert the arms of the puller tool.

When performing this operation, take the utmost care not to damage the front wheel hub.

Diagram showing a hand using a chisel (2) on a bearing (1) attached to a hub
  1. Remove the front hub bearing inner ring using the tool (1a) fitted with parts (1b) and (1c)
Name Code
1a Puller 1.840.005.003
1b Puller arms 1.840.005.302
1c Block 1.845.028.000
Diagram of a puller tool (1a) with puller arms (1b) and a block (1c) being used on a hub
  1. Slacken the screw (1a) and remove the dust guard (1b) from the front hub upright (1c).
Diagram showing a screw (1a), a dust guard (1b), and a front hub upright (1c)

(Cont.d.)

Parts & tools for this job For 1998 Fiat Seicento

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.