Workshop Manuals Factory service & repair Fiat
Fiat Seicento Factory Service Manual (1998-2010)08 · 44 Suspension and wheels
08 · Steering & suspension

Refitting

Make
Fiat
Model
Seicento Factory Service Manual
Year
1998–2010
Section
Hubs and wheels › Refitting
44 Suspension and wheelsRefitting · page 1 of 2
  1. Put the front hub upright in a vice.
  2. Remove the front hub bearing retainer circlip.
Diagram showing removal of a front hub bearing retainer circlip from an upright using a tool, with callouts for part 1 and circlip 2
  1. Remove the front hub bearing from the upright (1a) using a press (1b).
Diagram showing a press (1b) removing a front hub bearing (1a) from an upright supported on blocks

Refitting

Check that the inner surfaces of the front hub upright show no signs of seizing and that the arms have not been knocked or show signs of breakage. If so, replace the upright.

  1. Assemble the front hub bearing (1a) in the upright using a press (1b) interposing the tool (1c)
NameCode
1cInstalling tool1.874.366.000
Diagram showing installation of a front hub bearing (1a) into an upright using a press (1b) and installing tool (1c), with inset detail of the bearing
  1. If a press is not available, insert the bearing (1a) using tools (1b) and (1c)
NameCode
1bInstalling tool1.874.366.000
NameCode
1cGrip1.870.007.000
Diagram showing assembly of a front hub bearing (1a) into an upright using a grip (1c) and installing tool (1b), with inset detail of the bearing

(Cont.d.)

Parts & tools for this job For 1998 Fiat Seicento

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.