1. Vertical calibration.

(Op. 5540B38 continued)

1. V-V: vertical line corresponding to the vehicle's symmetric plane.
2. C-C: vertical planes intercepting the light cluster reference centres.
3. HC-HC: horizontal line corresponding to the height of light cluster reference centres from ground.
4. AC-AC: horizontal line 11 cm under HC-HC.
5. 15° slanted lines as shown in figure.

• Turn the dipped-beam headlights on.

1. Vertical calibration.

Turn the light cluster vertical calibration screw until the horizontal line between lit area and shade corresponds to AC-AC drawn on the screen.

2. Horizontal calibration.

Turn the light cluster horizontal calibration screw until the cross between horizontal and slanted lines corresponds to the cross between C-C and AC-AC on the screen.

5540B38 - HEADLIGHT/LIGHT CLUSTER BEAM - DIRECTION

• Prepare the vehicle with spare wheel, tool, fluids and fuel.
• Check the tyre pressure is correct.
• Turn the headlight beam adjustment knob to 0.
• Position the vehicle on flat ground, directed perpendicularly 10 metres in front of a screen or opaque surface with the following lines drawn on it.

(Cont..)