Workshop Manuals Factory service & repair Fiat
Fiat Seicento Factory Service Manual (1998-2010)10 · 55 Electrical equipment
10 · Electrical

Refitting

Make
Fiat
Model
Seicento Factory Service Manual
Year
1998–2010
Section
External lighting › Refitting
55 Electrical equipmentRefitting

(Op. 5540B10 continued)

  1. Remove the fastening screw (1a) and the fastening nut (1b).
Diagram showing the location of fastening screw 1a and fastening nut 1b on the headlight assembly
  1. Disconnect the electric connections (1a), (1b), (1c) remove the headlight.
NameConnector
1aRight-hand headlight beam adjuster motorN31
-Left-hand headlight beam adjuster motorN30
1bRight-hand front side lightF11B
-Left-hand front side lightF10B
1cRight-hand front headlightF11A
-Left-hand front headlightF10A
Diagram showing the locations of electric connectors 1a, 1b, and 1c on the headlight assembly

Refitting

  • Check the headlight is not damaged.
  • Connect the electric connections.
  • Assemble the headlight. Fasten the screw and the fastening nut.
  • Complete with Op. 5550C30 - DIRECTION INDICATOR (one), LH or RH - R.R.

899 1108

5540B22 - HEADLIGHT/LIGHT CLUSTER BULB (ONE), LH OR RH - R.R.

Removal

  1. Disconnect the electric connection (1a) and remove the protection cap (1b).
NameConnector
1Right-hand front headlightF11A
-Left-hand front headlightF10A
Diagram showing the electric connection 1a and protection cap 1b on the headlight assembly

(Cont..)

Parts & tools for this job For 1998 Fiat Seicento

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.