Workshop Manuals Factory service & repair Fiat
Fiat Seicento Factory Service Manual (1998-2010)10 · 55 Electrical equipment
10 · Electrical

Refitting

Make
Fiat
Model
Seicento Factory Service Manual
Year
1998–2010
Section
External lighting › Refitting
55 Electrical equipmentRefitting

(Op. 5540D10 continued)

  1. Remove the screws (1a) and release the cap pressing tab (1b).
Diagram showing the foglight assembly with callouts 1a pointing to the screw and 1b pointing to the pressing tab on the side of the unit.
  1. Remove the wire cap (1a) from its seat. Disconnect the electric connections (1b) from the bulb holder contracts and separate the foglight.
NameConnector
1bLeft-hand foglightF15
-Right-hand foglightF16
Diagram showing a hand disconnecting an electrical connector (1b) from the back of the foglight bulb holder, with callout 1a indicating the wire cap area.

Refitting

  • Connect the electric connections.
  • Introduce the wire cap in its seat..
  • Fasten and screw the cap pressing tab to the foglight unit.
  • Insert the complete foglight in its seat on the front grid and screw the fastening screws.
(Cont..)

5540D14 - FOGLIGHT BULB (ONE) LH OR RH - R.R.

Removal

  • Perform Op. 5540D10 - FOGLIGHT BULB (ONE) LH or RH - R.R.
  1. Release the complete bulb holder and bulb (1a) from its seat by means of the retaining spring (1b).
Diagram showing a hand releasing the bulb holder (1a) from its seat using the retaining spring (1b).
  1. Separate the complete bulb holder and bulb from the foglight bulb.
Diagram showing hands separating the bulb holder assembly (1) from the glass foglight bulb.

Parts & tools for this job For 1998 Fiat Seicento

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.