Workshop Manuals Factory service & repair Fiat
Fiat Seicento Factory Service Manual (1998-2010)10 · 55 Electrical equipment
10 · Electrical

Refitting

Make
Fiat
Model
Seicento Factory Service Manual
Year
1998–2010
Section
External lighting › Refitting
55 Electrical equipmentRefitting

(Op. 5540D14 continued)

Refitting

  • Connect the electric connections.
  • Insert bulb in foglight seat.
  • Stop the bulb holder with retaining spring.
  • Insert the wire cap in its seat.
  • Complete with Op. 5540D10 - (FOGLIGHT (ONE) LH or RH - R.R.)

1108 Sporting

5540D14 - FOGLIGHT BULB (ONE), LH OR RH - R.R.

Removal

  1. Remove screws (1a) and release the cap pressing tab (1b).
Diagram showing removal of foglight bulb holder, with callouts 1a pointing to screws and 1b pointing to a retaining tab.
  1. Remove the wire cap from its seat. Disconnect the electric connection (1a) from the bulb holder contact. Release the complete bulb holder and bulb (1a) from its seat by means of the retaining spring (1b).
Diagram showing hands disconnecting the electrical connector (1a) and removing the bulb holder assembly (1b) from the foglight housing.
  1. Disconnect the connection and separate the complete bulb holder and bulb.
Diagram showing hands separating the bulb (1) from the bulb holder assembly.

Refitting

  • Connect the electric connections.
  • Insert bulb in foglight seat.
  • Stop the bulb holder with retaining spring.
  • Insert the wire cap in its seat.
  • Screw the wire cap fastening tab to the foglight unit.

Parts & tools for this job For 1998 Fiat Seicento

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.