S11 Engine roar
- Make
- Fiat
- Model
- Seicento Factory Service Manual
- Year
- 1998–2010
- Section
- Noise and vibration › S11 Engine roar
DiagnosisS11 Engine roar
S11 Engine roar
A noise is heard at high and constant intensity leading from the engine area. It is only noted in certain rpm ranges
Preliminarily check::
– air delivery circuit intactness
| Step | Validity | Operation to be performed | Test results | ||
|---|---|---|---|---|---|
| All OK | Problems found | Intervention | |||
| 1 | CHECK ENGINE MOUNTS | Go to Step 2 |
Faulty engine mount | Settle the fastening: loosen the screws, centre them in their seats and tighten them to the specified torque PROCEDURE 1008A | |
| Check intactness and correct fastening of engine mounts | |||||
| 2 | CHECK ENGINE EXHAUST | Go to Step 3 |
Loose or damaged support | Restore or replace support PROCEDURE 1076A |
|
| Check intactness and correct fastening of flexible engine exhaust pipe supports | Damaged pipe, muffler or fitting | Replace component PROCEDURE 1076B |
|||
| 3 | CHECK CORRECT OPERATION | End of test | Fault persists | Seek the fault starting from another symptom (the noise was not interpreted correctly: see Glossary) | |
Parts & tools for this job For 1998 Fiat Seicento
- PARTEngine gasket setSearch: Fiat Seicento 1998 engine gasket set
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLFeeler gauge setSearch: feeler gauge set
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.