Workshop Manuals Factory service & repair Fiat
01 00 General information and technical data02 10 Engine03 18 Clutch04 21 Gearbox and differential05 27 Axle06 33 Braking system07 41 Steering08 44 Suspension and wheels09 50 Auxiliary units10 55 Electrical equipment11 70 Bodywork12 Diagnosis13 Tests14 Wiring diagrams
Fiat Seicento Factory Service Manual (1998-2010)12 · Diagnosis
12 · Diagnostics

S24 Gearbox noise - when cornering

Make
Fiat
Model
Seicento Factory Service Manual
Year
1998–2010
Section
Noise and vibration › S24 Gearbox noise - when cornering
DiagnosisS24 Gearbox noise - when cornering

S24 Gearbox noise - when cornering

NOISE J VIBRATIONS

When cornering (rightwards or leftwards) noise is heard in the gearbox area.

If the noise changes steering to the right or to the left, see table S40

If noise ceases in straightahead position, see table S45

Step Validity Operation to be performed Test results
OK ⚠ 🔧
1 CHECK TYPE OF NOISE Run a test, performing a series of complete steering strokes and then releasing the steering wheel. Check whether the intensity of the noise increases or not with the steering angle. All OK Problems found Intervention
Go to Step 4 Noise increase considerable with the steering angle Check CV joints: go to Step 2
Noise is constant whatever the steering angle Check differential: go to Step 3
2 CHECK CV JOINTS Check the CV transmission joints All OK Problems found Intervention
Go to Step 3 Damaged joint Replace joint
PROCEDURE OP. 2710A52 (wheel side) or
PROCEDURE OP. 2710A54 (differential side)
3 CHECK DIFFERENTIAL Check differential unit All OK Problems found Intervention
Go to Step 4 Sun and planet gears worn or damaged Overhaul or replace the differential unit
PROCEDURE OP. 2110D10
4 CHECK CORRECT OPERATION Check the fault is no longer present All OK Problems found Intervention
End of test – –

Parts & tools for this job For 1998 Fiat Seicento

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.