S41 Front noise driving on rough road
- Make
- Fiat
- Model
- Seicento Factory Service Manual
- Year
- 1998–2010
- Section
- Noise and vibration › S41 Front noise driving on rough road
DiagnosisS41 Front noise driving on rough road · page 1 of 3
S41 Front noise driving on rough road
When the car is running on rough roads or very bending roads, front noise is heard.
Preliminarily check:
– correct wheel fastening
– correct brake caliper fastening
| Step | Validity | Operation to be performed | Test results | ||
|---|---|---|---|---|---|
| OK | ⚠ | 🔧 | |||
| 1 | CHECK TYPE OF NOISE Run a road test on a rough or very bending road to identify the type of noise |
All OK End of test |
Problems found | Intervention | |
| Noise identified: squeak/creak | Go to Step 2 | ||||
| Noise identified: whistle/blow | Go to Step 5 | ||||
| Noise identified: knock | Go to Step 7 | ||||
| 2 | CHECK SUSPENSION COMPONENT Check for signs of scraping on front suspension components: – between suspension arm bushes and washers – between dust guard and shock absorber – between rebound buffer and its housing |
All OK Go to Step 3 |
Problems found | Intervention | |
| Signs of scraping | Lubricate or replace parts PROCEDURE 4410A e 4410B | ||||
| 3 | 1108 | Check intactness and correct fastening of stabiliser bar pads | All OK Go to Step 4 |
Problems found Worn or incorrectly fastened stabiliser bar pads |
Intervention Restore, lubricate or replace pads PROCEDURE OP. 4410C10 |
| 4 | CHECK ENGINE COMPARTMENT FASTENINGS Check correct position and fastening of pipes and guards in engine compartment |
All OK Go to Step 8 |
Problems found Parts incorrectly connected causing interference |
Intervention Fasten pipes or guards correctly |
|
(Cont..)
Parts & tools for this job For 1998 Fiat Seicento
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLSocket setSearch: socket set metric
- BOOKHaynes manualSearch: Haynes manual Fiat Seicento
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.