Workshop Manuals Factory service & repair Fiat
01 00 General information and technical data02 10 Engine03 18 Clutch04 21 Gearbox and differential05 27 Axle06 33 Braking system07 41 Steering08 44 Suspension and wheels09 50 Auxiliary units10 55 Electrical equipment11 70 Bodywork12 Diagnosis13 Tests14 Wiring diagrams
Fiat Seicento Factory Service Manual (1998-2010)12 · Diagnosis
12 · Diagnostics

S41 Front noise driving on rough road (page 3 of 3)

Make
Fiat
Model
Seicento Factory Service Manual
Year
1998–2010
Section
Noise and vibration
DiagnosisS41 Front noise driving on rough road · page 3 of 3

Diagnosis table

S42 Rear noise driving on straight, smooth road

When the car is running on a straight, smooth road, rear noise can be heard. The noise increases with speed

Preliminarily check:
– tyre pressure
– tyre type and condition

Step Validity Operation to be performed Test results
OK ⚠ 🔧
All OK Problems found Intervention
1 CHECK WHEEL BEARINGS
Run a test, steering gradually rightwards or leftwards. Check whether the noise increases
Noise is constant:
Go to Step 2
Noise increases considerably with steering angle: worn or damaged bearing Replace wheel hub bearing
PROCEDURE OP.
4450D36
2 CHECK WHEELS
Check
– correct wheel geometry
– wheel rim intactness
Go to Step 3 Incorrect wheel geometry Restore correct wheel geometry
PROCEDURE OP.
4450B46
Dented or distorted rims Replace rims
PROCEDURE OP.
4450B13
3 CHECK CORRECT OPERATION
Check the fault is no longer present
All OK
End of test
Fault persists Seek fault starting from another symptom (noise was not correctly interpreted: see Glossary)
Finally, see table S43

Parts & tools for this job For 1998 Fiat Seicento

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.