Workshop Manuals Factory service & repair Fiat
01 00 General information and technical data02 10 Engine03 18 Clutch04 21 Gearbox and differential05 27 Axle06 33 Braking system07 41 Steering08 44 Suspension and wheels09 50 Auxiliary units10 55 Electrical equipment11 70 Bodywork12 Diagnosis13 Tests14 Wiring diagrams
Fiat Seicento Factory Service Manual (1998-2010)12 · Diagnosis
12 · Diagnostics

S45 Front noise when cornering

Make
Fiat
Model
Seicento Factory Service Manual
Year
1998–2010
Section
Noise and vibration › S45 Front noise when cornering
DiagnosisS45 Front noise when cornering

S45 Front noise when cornering

When the car is moving front noise can be heard especially when steering

NOTE: When straight the noise ceases.

Step Validity Operation to be performed Test results
OK ⚠ 🔧
1 CHECK STEERING UNIT AND STEERING LINKAGES All OK Problems found Intervention
Check intactness of steering unit and linkages. Go to Step 2 Damaged or worn linkages Replace linkages
PROCEDURE OP. 4110B10
Faulty steering unit Replace steering unit
PROCEDURE OP. 4120A10
2 CHECK STEERING COLUMN BEARINGS All OK Problems found Intervention
Check for steering column excessive play. Check intactness and operation of steering column bearings Go to Step 3 Damaged or worn bearings Replace bearings
PROCEDURE OP. 4110A30
(PROCEDURE OP. 4110A31 versions with airbag)
3 CHECK CORRECT OPERATION All OK Problems found Intervention
Check the fault is no longer present End of test Fault persists Seek fault starting from another symptom (noise was not correctly interpreted: see Glossary)
Finally, see table S40

Parts & tools for this job For 1998 Fiat Seicento

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.