Intake air pressure/temperature sensor - r r

Operation 1056B54 · Multi-point injection system (mpi)

1.2 16v

Removing

- 5530B56 BATTERY DRIP TRAY COVER - R.R..

Disconnect the battery negative terminal.

1. Disconnect the electrical connection for the sensor.

2. Undo the fixing bolt (2a) and remove the sensor (2b).

1.4 16v

Removing

- 5530B56 BATTERY DRIP TRAY COVER - R.R..

Disconnect the battery negative terminal.

1. Disconnect the electrical connection for the sensor.

2. Undo the fixing bolt (2a) and remove the sensor (2b).

1.6 16v

Removing

- 5530B56 BATTERY DRIP TRAY COVER - R.R.

Disconnect the battery negative terminal.

- 1016A10 sound-proofing cover - r + r

1. Disconnect the electrical connection from the intake air temperature/pressure sensor.

2. Undo the bolts (2a) and remove the intake air temperature/pressure sensor (2b).

1.2 16v

Refitting

Fit the intake air temperature/pressure sensor and tighten the fixing bolt.

Connect the sensor electrical connection.

Connect the battery negative terminal.

- 5530B56 BATTERY DRIP TRAY COVER - R.R..

1.4 16v

Refitting

Fit the intake air temperature/pressure sensor and tighten the fixing bolt to the intake manifold.

Connect the sensor's electrical connection.

Connect the battery negative terminal.

- 5530B56 BATTERY DRIP TRAY COVER - R.R..

1.6 16v

Refitting

Place the intake air temperature/pressure sensor back in its housing and secure it using the bolts.

Connect the electrical connection to the intake air temperature/pressure sensor.

- 1016A10 sound-proofing cover - r + r

Connect the battery's negative terminal.

- 5530B56 BATTERY DRIP TRAY COVER - R.R.