Gear box left rigid mount - r r

Operation 1004D10 · Power unit fastenings

1.6 16v

Removing

- 1016A10 sound-proofing cover - r + r

- 5530B56 BATTERY DRIP TRAY COVER - R.R.

- 5530B52 Battery DRIP TRAY/SUPPORT - R.R.

- 1048A32 sleeve from air cleaner to intake manifold - r + r

- 1048A21 filter input sleeve - r r

- 1048A10 air cleaner filtering element - replace

- 1008B30 gearbox side mount flexible block - replace

1. Undo the bolts (1a) and move the clutch release cylinder (1b) to the side.

1. Undo the upper fixing nut.

2. Undo the bolts (2a) and remove the gearbox side rigid support (2b) for the power unit.

Refitting

Place the gearbox side power unit rigid support back in its housing and tighten the bolts fixing it to the strut to the recommended torque.

Tighten the upper fixing nut to the recommended torque.

Position the clutch release cylinder and secure it using the bolts.

- 1008B30 gearbox side mount flexible block - replace

- 1048A10 air cleaner filtering element - replace

- 1048A21 filter input sleeve - r r

- 1048A32 sleeve from air cleaner to intake manifold - r + r

- 5530B52 Battery DRIP TRAY/SUPPORT - R.R.

- 5530B56 BATTERY DRIP TRAY COVER - R.R.

- 1016A10 sound-proofing cover - r + r