Eol not programmed in body computer configuration error

Fault diagnosisEol not programmed in body computer configuration error

EOL NOT PROGRAMMED IN BODY COMPUTER CONFIGURATION ERROR

The diagnostic equipment signals the error: C1100 - EOL configuration not programmed in the Body Computer

This error is signalled if the ABS-VDC control unit has never received a vehicle configuration from the Body Computer

1	PROXI ALIGNMENT BY BODY COMPUTER	All OK	Problems met	Operation
		Results of the tests
	Connect the diagnostic equipment, turn the ignition key ON and, in the active diagnosis ambient at the Body Computer control unit, request the PROXI alignment. The ABS control unit should not appear amongst the control units for which the latter is required	Continue to Step 2	The ABS control unit requires PROXI alignment	Carry out the PROXI alignment for the ABS control unit
2	CHECK ON CORRECT OPERATION	All OK	Problems met	Operation
	Turn the key to the OFF position and then the ON position to ensure that the control unit checks whether the PROXI alignment has been successful. Check that the fault is no longer present	End of diagnosis

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.