Steering angle sensor not calibrated error
- Make
- Fiat
- Model
- Stilo Factory Service Manual
- Year
- 2001–2007
- Section
- Examiner › Steering angle sensor not calibrated error
Fault diagnosisSteering angle sensor not calibrated error
STEERING ANGLE SENSOR NOT CALIBRATED ERROR
The diagnostic equipment signals the following error: C1508 Steering angle sensor not calibrated
This error is signalled if the steering angle sensor has not been calibrated
| Results of the tests | ||||
| 1 | STEERING ANGLE RECALIBRATION | All OK | Problems met | Operation |
|---|---|---|---|---|
| Using the diagnostic equipment, in ACTIVE DIAGNOSIS, carry out the STEERING ANGLE CALIBRATION, making sure that the outcome is successful | Continue to Step 2 | The procedure is not successful | Replace the steering angle sensor Op. 3350E20 | |
| 2 | CHECK ON CORRECT OPERATION | All OK | Problems met | Operation |
Delete the errors using the diagnostic equipment Carry out road to make the control unit check whether there are still errors present. Return to the workshop and check that the fault is no longer present using the diagnostic equipment. | End of diagnosis | |||
Parts & tools for this job For 2001 Fiat Stilo
- TOOLOBD2 scannerSearch: OBD2 scanner
- TOOLDigital multimeterSearch: automotive digital multimeter
- TOOLBack-probe test leadsSearch: back probe test leads
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.